| Eglish | 中文版 |
Products > Digital Card > TE110P

TE110P Specification

The TE110P supports 1 E1/T1 channels,and provides up to 4.1Mbps of full duplex data throughput or 30 voice calls over one T1 and or E1 lines to support high performance PCI-based routing and telephony systems. Because the TE110P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.
DMLink has designed the TE110P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of DMLink Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, DMLink' s solutions are paving the way for a new generation of worldwide effective converged communications.
  • Up to one T1/E1 ports with a single PCI interface for high performance voice and data applications.
  • Line decoding: HDB3, AMI, B8ZS. Framing: CRC4, non-CRC4, ESF, D4T1/E1.
  • Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper interrupt sharing without manual tuning.
  • 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Low latency hardware TDM cross-connector
  • E1 long-haul receiver
  • Supports standard telephony and data protocols. (Including RBS and PRI protocol families for voice and PPP, Cisco HDLC and Frame Relay data modes).
  • Compatible with Zaptel Linux driver.
  • 100% compatible Asterisk PBX all features.
  • Support SS7.
  • Support for the Asterisk™, OPAL™ Yate, FreeSwitch™ PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications.
  • Dimensions: 2U Form factor: 120mmx 55 mmfor use in restricted chassis.
  • Short 2U compatible mounting clips included for installation in 2U rackmount servers.
  • High quality, tested RJ45 cables included. Power: 800mA peak, operational 300mA max at +3.3v or 5v.Temperature range: 0 – 50C. Autosense compatibility with 5v and 3.3v PCI busses.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.

Linux (all versions, releases and distributions from 1.0 up). Windows NT/ 2000/ XP, FreeBSD, Open BSD,NetBSD, Solaris.

OnLine Service
Call me!
Call me!
Contact Us

Get in touch with us...
Tel: +86-755-33068479
Fax: +86-755-33068459
Email: dmlink@qq.com

Copyright © DMLink Technology Co., Ltd. All rights reserved.