Using stardward Asterisk Open Source PBX software and standard PC hardware, one can create a telephony environment that includes all the sophisticated features of a high-end business telephone system.

 

Using an industry-standard bursting, bus-mastering PCI interface chip that is found within millions of PC systems worldwide, the TDM800P eliminates the requirement for separate channel bank and T1 interface cards, at an industry-leading price. The single- FXO and single-FXS modules are interchangeable, allowing the creation of any combination of interfaces.

 

It runs on standard asterisk driver, No need 3rd partner driver, no patch  is required.

 

Package includes:

 

TDM800P card in original packaging
8 Modules between FXO & FXS
RJ45 to 4x FJ11 splitter   2pcs

2 year manufacturer's warranty

 

 

[root@localhost ~]# dahdi_cfg -vv
DAHDI Tools Version - SVN-trunk-r10153

DAHDI Version: SVN-trunk-r10172
Echo Canceller(s): HWEC, MG2
Configuration
======================

Channel map:

Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 08)

8 channels to configure.

Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to mg2
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2

[root@localhost ~]# lsdahdi
### Span  1: WCTDM/0 "Wildcard TDM800P" (MASTER)

  1 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
  2 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
  3 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
  4 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
  5 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
  6 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
  7 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
  8 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
 

[root@localhost ~]# dahdi_scan
[1]
active=yes
alarms=OK
description=Wildcard TDM800P
name=WCTDM/0
manufacturer=Digium
devicetype=Wildcard TDM800P
location=PCI Bus 02 Slot 05
basechan=1
totchans=8
irq=17
type=analog
port=1,FXO
port=2,FXO
port=3,FXO
port=4,FXO
port=5,FXO
port=6,FXO
port=7,FXO
port=8,FXO